Sizing + How to Measure
It's really best to have a friend, family member or, for the best results, a professional seamstress/tailor take your measurements.
Taking your own measurements will almost always result in inaccuracies.
It's best to be measured wearing the exact undergarments and shoes you'll be wearing.
Standard sizes are determined by the bust, waist, and hip measurements. Also included is a “Hollow to Hem” measurement; this is the measurement from the base of the neck (hollow of the neck) to the bottom of the hem and determines the length of the dress.
Use ONLY a standard cloth measuring tape. Do not pull the tape tightly; it should be just tight enough to stay in place. Please keep in mind that cloth measuring tapes can stretch out.
Taking the Bust Measurements
1. Stand straight with your heels together and your arms down at your side.
2. Position the measuring tape so that it covers the widest part of your back and the fullest part of your bust.
Taking the Waist Measurements
1. Standing straight, bend to your side. The bend is your natural waist.
2. Stand straight and keep your heels together.
3. Place the measuring tape around your natural waist.
Taking the Hip Measurements
1. Stand straight with your heels together and your arms down at your side.
2. Position the measuring tape around the widest part of your hips.
Once you have taken your measurements, refer to the size chart. The size chart shows the approximate measurements used to make each size. Compare your measurements to the size chart to determine the correct size or input your measurements at checkout for a custom choice.
If you cannot match your exact measurements to all three measurements indicated on the size chart we suggest ordering according to the largest measurement. Remember, garments can be taken in, but taking them out depends on the seam allowances which, in most cases, are very slim. Additionally, a custom sized gown can always be ordered and will take the same amount of time to produce.
STANDARD SIZE CHART